Clinical Calculators - Residual Cancer Burden Calculator
The following parameters are required from pathologic examination in order to calculate Residual Cancer Burden (RCB) after neoadjuvant treatment:
- The largest two dimensions (mms) of the residual tumor bed in the breast (largest tumor bed if multicentric disease)
- Submission of the entire largest cross-sectional area of the residual tumor bed for histologic mapping, with specific identification of those slides in the pathology report (e.g. "the largest cross-sectional area of primary tumor bed was submitted in cassettes A5 - A9")
- If the residual tumor is large (i.e. largest diameter > 5 cm), then at least 5 representative cassettes from the largest cross-sectional area are sufficient, but should be identified in the original pathology report (e.g. "representative sections from the largest cross-sectional area of primary tumor bed were submitted in cassettes A5 - A9")
- Histologic assessment of the percentage of the tumor bed area that contains carcinoma (all carcinoma, i.e. invasive and in situ), select one of the following:
- 0%, 1%, 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%
- To assess cellularity it is helpful to scan across the sections of tumor bed and then estimate the average cellularity from the different microscopic fields.
- When estimating percentage cancer cellularity in any microscopic field, compare the involved area with obvious standards, e.g. more or less than half, one quarter, one fifth, one tenth, one twentieth, etc.
- Expect there to be variable cellularity within the cross section of any tumor bed, but estimate the overall cellularity from the average of the estimates in different microscopic fields of the tumor bed.
- e.g. if cellularity in different fields of the tumor bed were estimated as 20%, 10%, 20%, 0%, 20%, 30%, then an average estimate of overall cellularity would be 20%.
- Histologic estimate of the percentage of the carcinoma in the tumor bed that is in situ, select one of the following:
- 0%, 1%, 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%
- The number of positive (metastatic) lymph nodes
- The largest diameter (mm) of the largest nodal metastasis